
When we started delivering new 26M's we didn't think this would be a very popular option. Although they made a real nice addition to the cockpit, we felt they were a little on the picey side. Boy were we wrong.
We are now installing this option on two out of every three new Macs. As a result, we have made the decision to make them available on a retail basis.
Our stern rail seat frames are built with premium polished stainless steel with low maintenance marine ply seating surfaces. Installation is a pretty straight forward affair and easy to follow step-by-step instructions are included to guide you through the process.
I have to admit they make a big impact in the cockpit. Especially when at the slip or at anchor. Having two additional seats and more legroom is priceless.
MacGregor 26M
Price: $510.00

We cannot think of a modification that will change the look, feel and character of your Mac like the addition of teak and holly flooring in your cabin.
Our flooring system starts with top-quality 6mm teak and holly ply. The individual sections are CNC router cut based on exact digitized measurements of the cabin sole. The faces are sanded and the edges rolled for a beautifully finished look. We then apply the topcoat which protects the floor and gives it that look most of us envy.
Good teak and holly ply is expensive. We knew there was no sense in spending the R & D money to develop a flooring package if it couldn't be brought to the market at a reasonable price. With the assistance of our friends at IdaSailor and their CAD software and CNC router, we have been able to produce a package at what we feel is a pretty incredible price point.
Think about it. A gorgeous mainternance-free cabin sole that will clean up with a sponge, mop or towel. No more damp, smelly carpeting to replace over and over again. One of our better sellers on this site is our carpet replacement package for $70.00. All things considered, what's the better deal?
Installation is simple. Just pick up a tube of 3M 5200 and wait for nice day. Detailed instructions are included with the package but the process is pretty much a no-brainer.
We are so thrilled with how this package turned out that we will be offering it as an installed option on all of our new boats.
MacGregor 26M
Price: $395.00
We are always looking for ways to make the Mac a better, safer yacht.
One of the areas that begs for an upgrade is the factory supplied lifelines. Although they certainly do the job, we would like to see a set-up that is a little more stronger and refined.
So we went to work and designed a replacement set that is safe, strong, stylish and affordable. Just like our custom running rigging, our lifeline package is built by an experienced rigger at our Colorado facility and its guaranteed to fit your 26M right out of the box. Plus its a breeze to install.
The factory supplied lines are exposed wire and can develop burrs over time. So we upgraded it to a white poly-coated stainless steel cable. It looks great and eliminates the scratches and cuts to the hands and legs. We completed the package by adding premium quality Suncor stainless steel fittings at all connection points. This includes both toggles and pelicans hooks.
Simply put, it is a package that will look great on your 26M and last for years to come.
MacGregor 26M
Price: $295.00
The Boomkicker provides simple and affordable boom support for boats 14 to 38 feet.
Racing or cruising, expert or novice, the Boomkicker is the simple solution to hold the boom out of the way, eliminating the topping lift, improving your speed and controlling sail shape. You simply install it and forget it.
The Boomkicker's lightweight, low profile design is nicely finished and unobtrusive. For easy installation and rigging, the Boomkicker mounts independently inside the vang, out of the way, Two coated fiberglass rods provide the force to support the boom.
Installation is quick and simple and all mounting fittings are included.
The Boomkicker has been extremely popular with Mac owners for some time now. So popular in fact that the manufacturer developed two custom models for MacGregor sailboats. One for the 26M and one for the 26X.
This simple yet incredibly effective piece of gear should be on every Mac owner's modification list.
We also have Boomkickers available for just about every MacGregor model made. E-mail or give us a call for pricing.
For the MacGregor 26M:
Price: $139.95
For the MacGregor 26X:
Price: $139.95
In stock and ready to ship is the new Titan winch handle from Lewmar.
As you know, the MacGregor 26M and 26X both carry Lewmar #6 winches as part of their standard deck hardware package. This space age handle has been designed for the #6 as well as the entire line of Lewmar winches.
The Titan features two piece welded construction for extreme stiffness. It has a comfortable, ergonomically designed grip and locking mechanism and it actually floats due to its glass filled nylon composition.
The most incredible feature of the Titan is that Lewmar provides a lifetime warranty against breakage!
The Titan is available in blue or red. You choose your color at checkout.
Price: $29.99
Ya gotta have one of these puppies.
Here is a simple product that will solve the problem of access and storage of your winch handle.
The Lewmar Winch Handle Pocket is simple to install. You just have to decide where to mount it. We have seen several good places including the pedestal and at the side of the galley.
Check the modifications section of www.macgregorsailors.com. You'll find several other possible locations.
Price: $14.95
An amazing tool that every Mac owner should have on board.
Over the years we have seen some pretty ingenious and idiotic ways to attach and/or adjust the tensioning of your stays. Let's face it, aligning those little holes on the adjusters can be an excercise in futility. We have been quilty of using the ole screwdriver method. But we have seen some real crazy things too. Bic pens, coat hangars and even an old shoelace.
You can now quickly and easily attach and/or adjust your stays with our new "Stay Adjuster". This unique tool looks and acts just like an oversized pair of Vise-Grip pliers. Simply attach it to each piece of an adjuster and give it a little squeeze. Insert your pin where desired and your done!
We simply can't imagine being around a Mac without this great gadget.
Price: $24.95

Although our hardware package for the MacGregor 26M and 26X cruising spinnaker isn't required to fly the sail, we think you will find this modest investment will make a huge difference in controlling and protecting it.
For just $75.00 you will receive our tack pennant which has been custom designed and built for the Mac 26M and 26X using Samson Trophy cordage and Ronstan hardware as well as a pair of stainless steel Garhauer turning blocks.
The tack pennant assists in lifting the cruising spinnaker higher off the deck. It helps protect the sail from dragging on the pulpit as well as other hardware that may possibly come in contact with it. The turning blocks simply assist in controlling the sail and increasing overall performance.
Price: $75.00
The Windscoop Ventilating Sail puts an end to hot, stuffy cabins and sleepless nights. It is aerodynamically designed to force the slightest breeze down into your cabin to keep you cool and comfortable. All seams are double-stitched. Two battens are sewn into place.
The versatile Windscoop can be hung from a halyard or a roller furling sheet. Fits any hatch or companion-way up to 4 feet (120 cm) wide. Nothing to install. Since the Windscoop has no tie-downs, once you put it up, it will follow variable wind. Works with most screens. Windscoop is packed in its own protective nylon storage bag. Colors vary.
Price: $38.95

Okay. Raise your hands.
Rot, mildew, stains, tears or fraying edges?
Maybe its time to throw those smelly old things in the garbage and replace them with our custom replacement carpet package for both the MacGregor 26X and 26M.
Our package features a substantially better grade of carpet than the factory supplied original. It is stain resistant and can be washed repeatedly with just soap and water. All edges are sewn to eliminate tears and fraying and they are guaranteed to fit your Mac right out of the box.
We have chosen separate colors for the X and M in order to match the original as closely as possible. The 26M carpet is a medium brown like the photo above and the X is a little lighter. Both will hide traffic wear during a cruise or when you have time to vacuum or simply shake them out over the side.
For the MacGregor 26M
Price: $89.95
For the MacGregor 26X
Price: $94.95